Model 3196RC T-DAC User Manual | 2 • Hardware installation |
| |
Figure 7. Ethernet RJ-45 pin and signal definitions for T-DAC
Connecting the 10/100Base-T Ethernet port to an Ethernet-capable workstation or PC
The 10/100Base-T Ethernet port can connect to a single Ethernet-capable workstation or PC by means of a cross over cable. Refer to figure 8 to assemble a cross-connect cable that will connect between the NIC Ether- net port in the workstation and the T-DAC 10/100Base-T Ethernet port.
Figure 8. Cross-over RJ-45-to-RJ-45 Ethernet cable diagram
Connecting the EIA-561 RS-232 configuration port (DCE configured)
Install the supplied RJ-45-to-RJ-45 cable with the DB9-RJ45 adapter between the T-DAC RS-232 port (see figure 6 on page 27) and an open serial port on your computer. If you need to assemble your own cable, refer to the pinout diagram in figure 9.
RJ-45 Jack | DB-9 | | Signal Name |
| | | 6 | DSR | Wired together |
| | 1 | 1 | CD |
| | (No other electrical |
| | 2 | 4 | DTR |
| | connection) |
| | 3 | 5 | SG |
|
| | 4 | |
| | 2 | RD (driven by DACS) |
| | 5 |
| | 3 | TD (received by DACS) |
| | 6 |
|
| | 7 | 8 | CTS (driven by DACS) |
|
| | 8 | 7 | RTS (received by DACS) |
|
| | |
| | | | | |
Figure 9. DB-9-to-RJ-45 cable diagram
