Patton electronic 6511RC user manual Completing the installation

3 • Configuring the Matrix Switch for operation Model 6511RC User Manual

5.Verify that the green WAN LED is illuminated, indicating that the Model 6511RCSTM-1 port is acti- vated, is synchronized with the SDH network, and operating normally.

Note If the Matrix Switch does not behave as described, the most likely cause is that the Matrix Switch SDH parameters values for the STM- 1 link do not match those of the connected SDH network. To resolve this problem, double check the parameters on the Matrix Switch SDH Configuration page against those of the Connected SDH net- work, and correct any incorrect values.

6.There are three LEDs that indicate status for the Matrix Switch Ethernet subsystem. For information about interpreting the three Ethernet status LEDs, see table 3 on page 27.

Congratulations! Your Matrix Switch is now installed. If your Matrix Switch settings, refer to the Model 6511RC online at www.patton.com/manuals/6511RC-arg.pdf

you require further information about configuring Matrix Switch Administrator’s Reference Guide available

.

Note For information on activating and de-activating your Model 6511RC Matrix Switch, refer to chapter 4, “Operation and shutdown” on page 79

78 Completing the installation