Model 6511RC User Manual | 3 • Configuring the Matrix Switch for operation |
|
|
2.To save the displayed data as a text file, use your browser’s Save function (see figure 59). Using Netscape or Internet Explorer, for example, do the following:
–Click the File menu.
–Click Save As. A dialog box will appear. Use the dialog to save the data displayed on your browser (your Matrix Switch configuration parameters) to a text file.
–Select the folder in which you want to store the file.
–Type a file name.
–Click Save.
Figure 59. Saving the access server flash memory configuration data as a text file
Completing the installation
This section verifies that the Model 6511RC is fully operational.
1.Perform a hard reset as follows:
–On the configuration menu, click the HOME hyperlink to display the Matrix Switch Home Page.
–Scroll down to Operator Actions buttons.
–Click the Hard Reset button.
2.Wait about ten seconds for the Matrix Switch to fully resume normal operation.
3.Verify the green POWER LED is lit. If the POWER LED is flashing green, refer to chapter 5, “Trouble- shooting and maintenance” on page 81.
4.Verify that green SYSTEM LED is flashing to indicate the Model 6511RC system is operating normally.
Completing the installation | 77 |
