Peavey IPR 4500, IPR 3000, IPR 6000, IPR 1600 manual Setup Wizard Input Mode Select

Setup Wizard

Setup Wizard Input Mode Select:

The IPR™ DSP has the capability of routing the signal coming into channel A to channel B for Mono operation. In the event the user selects a mid-high cabinet for one channel and a subwoofer for the other channel, the IPR DSP will make the assumption the amplifier is being used in Mono and will route the signal coming into channel A to channel B, as well.

Otherwise, the user will be prompted to select the Input mode of operation. Mono, as described above, will send the signal coming from input A to both the A and B amplifiers. (Fig. 5). In other words, both channels will receive the signal coming from channel A. In Stereo mode, each channel will receive an independent input. Amplifier A will use input A and amplifier B will get signal from Input B (Fig. 6).

Keep in mind the A and B 1/4” thru outputs are connected in parallel with the A and B input connectors, respectively. This is extremely helpful when running multiple amplifiers. To preserve the balanced input when using the thru output, use a TRS (Stereo) 1/4" cable.

Any of these settings can be changed in Manual mode.

Fig. 5

Fig. 6

22