QUICK INSTALLATION GUIDE
Follow the next seven steps for the fastest way to get your product up and running.
Step 1: Connecting A Camera Or Monitor
1
3
2
4
Key:
1 = Camera or other video source with composite PAL or NTSC output
2= Video monitor with composite PAL or NTSC input
3 = Transmitter
4 = Receiver
Figure 3. Connecting A Camera Or Monitor
•To connect a camera, plug one end of a standard coaxial cable into the BNC connector on the front of the transmitter unit and the other end into the camera. You can use any video source with a compos- ite PAL or NTSC output.
•To connect a monitor, plug one end of a standard coaxial cable into the BNC connector on the front of the receiver unit and the other end into the monitor. You can use any PAL or NTSC video monitor with a composite PAL or NTSC input.
For more information about video sources and monitors, see the Hardware Installation section.
Step 2: Connecting Additional Items
Connect any additional items, such as alarms, audio, etc.
[ 12 ] Pelco Manual
