IMPORTANT SAFEGUARDS AND WARNINGS

Observe the following warnings before installing and using this product.

1.Installation and servicing should be done by qualified service personnel only and conform to all local codes.

2.Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is designed for indoor use only and it must not be installed where exposed to rain and moisture.

3.If the unit requires 120/230 VAC and does not have an on/off switch, the input power circuit must have a circuit breaker.

The product and/or manual may bear the following marks:

This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.

This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.

C A U T I O N :

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

Thoroughly familiarize yourself with the information in this manual prior to installation and operation.

Regulatory Notices

Note: This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment gen- erates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

[ 6 ] Pelco Manual C1977M-D (6/02)

Page 6
Image 6
Pelco C1977M-D manual Important Safeguards and Warnings, Regulatory Notices