Pelco C1977M-D manual Pal

Table C. Video Settings (continued)

Input source	camera	T	To facilitate the connection of video tape
			recorders as video sources, the input can
			be switched from the default camera po-
			sition to VCR. VCRs require a less rigid
			setting of the internal PLL, due to jitter
			caused by the mechanical components.
Output	PAL	R	The video standard to be used at the
standard			output of receivers can be selected to
			be PAL or NTSC compatible. Transmit-
			ters automatically adapt to the standard
			of the connected video source.
Enable JPEG	low quality	T	This field must be enabled (activated)
images			for the system to take a snapshot of the
			camera view. Choose either “high qual-
			ity” or “low quality” to enable. The next
			five fields are all settings to control this
			snapshot.
Time slice	0	T	Enter the number of seconds that a new
			JPEG should be displayed.
FTP server IP	0.0.0.0	T	Enter the address used to connect to the
address			FTP server.
Login name	n/a	T	Enter the login name used to access the
			FTP server.
Password	n/a	T	Enter the password for the login name.
Path	n/a	T	Enter the directory to start in, once
			connected to the FTP server.

Pelco Manual C1977M-D (6/02) [ 39 ]