[ 84 ] Pelco Manual C1977M-D (6/02)
Connecting Pelconet To DX3000 For Recording

Refer to Figure 50. This configuration lets an operator remotely view, record, and playback video on a

DX3000 digital video recorder.

•Set the control terminal port to COM2 and 1200, 8, NONE, 1.

•Connect the monitor output from the DX3000 to the video input on the PelcoNet transmitter.

•Connect the NULL modem cable from the RS-232 port on the back of the DX3000 to the control terminal port on the PelcoNet transmitter.

•Enable Microsoft VM in Internet Explorer by going to: Tools -> Internet Options -> Advanced -> Microsoft VM. Enable all three options and

reboot.

Figure 50. Using PelcoNet with a DX3000 Recorder

1
MIC
IN
OUT
23456789
1
RS-232C
234
1
GND
23456789
CAMERA
IN
AUDIO
CAMERAOUT
ALARMIN
56789
ON OFF
SCSI
Y/C
VIDEO
OUT
GND
RESET
SCSI
TERMINATION
FRAME
RSD 2
TXD 3
DTR 4
SG 5
DSR 6
RTS 7
CTS 8
FRAME
2 RSD
3 TXD
4 DTR
5 SG
6 DSR
7 RTS
8 CTS
BAUD RATE: 1200
DATA BITS: 8
PARITY: NONE
STOP BITS: 1
BAUD RATE: 1200
DATA BITS: 8
PARITY: NONE
STOP BITS: 1
DELIMITER: CR

DX3000

00670