GENERATING A CERTIFICATE REQUEST
1.Place your mouse pointer over the Network tab.
2.Select SSL from the
3.Click the Install Certificate button located at the bottom of the SSL Configuration page. The Select Certificate Install Method option buttons appear on the page.
4.Select Generate Certificate Request, and then click Next. The Certificate Request Form opens.
5.Fill in all of the fields, and then click Generate Request. The following progress message appears on the page: “Generating certificate signing request, please wait.”
6.Send the CSR, which looks like an encrypted block of undecipherable text, to a
7.After you receive the signed certificate, click the Install Certificate button to upload the signed certificate to the device.
8.After the certificate is uploaded, select the desired mode.
9.Click Save.
NOTE: Depending on the
GENERATING A SELF-SIGNED CERTIFICATE
1.Place your mouse pointer over the Network tab.
2.Select SSL from the
3.Click the Install Certificate button located at the bottom of the SSL Configuration page. The Select Certificate Install Method option buttons appear on the page.
4.Select the “Generate
5.Fill in all of the fields, and then click Generate Request. The following progress message appears on the page: “Your changes are being applied. This process might take up to 3 minutes.” After three minutes, the certificate is uploaded to the device.
6.After the certificate is uploaded, select the desired mode.
7.Click Save.
NOTE:
29 |
