Pelco C2953M-B manual Enabling Secure Shell

ENABLING SECURE SHELL

Figure 19. SSH Settings Page

1.Place your mouse pointer over the Network tab.

2.Select SSH from the drop-down menu.

3.Select the Enabled check box.

NOTE: The username is always root and cannot be changed. The username and password are required when accessing the camera through a third-party SSH client.

4.Click in the Password box and type a password (4 to 16 alphanumeric characters). Passwords are case-sensitive.

5.Click in the Re-type Password box and retype your password.

6.Click the Save button to save the password and enable SSH, or click the Reset button to clear all of the information you entered without saving it.

30 C2953M-B (10/09)