SELECTING THE AUDIO CONFIGURATION SETTINGS
To use audio with the camera you must have an audio device connected to the accessory port located on the back of the camera. Once the device is connected, audio can only be enabled through the primary stream.
Audio and video is not synced when viewing and listening to the primary stream through a Web browser. You will experience a
NOTE: Improper use of audio/visual recording equipment may subject you to civil and criminal penalties. Applicable laws regarding the use of such capabilities vary between jurisdictions and may require, among other things, express written consent from the recorded subjects. You are solely responsible for insuring strict compliance with such laws and for strict adherence to any/all rights of privacy and personalty.
Figure 31. Audio Configuration Page
1.Place your mouse pointer over the A/V Streams tab.
2.Select the Audio Configuration option from the
3.Select the Enabled option in the Audio section.
4.Select the audio device setting from the Audio Device
USB Line In: Enables audio from a microphone connected to the USB accessory port.
Native Line In: (Only available with specific models). Enables audio from a microphone connected to the
Native Microphone In: (Only available with specific models). Enables audio from the internal microphone.
5.Select the encoding method from the Encoding
6.Set the sensitivity of the input level by moving the Input Level slider. Move the slider to the right to increase the sensitivity level; move it to the left to decrease the sensitivity level. For example, if the camera is installed in a noisy environment or the connected microphone has a
NOTE: Do not use the mute button on an audio device, as it will override the audio software settings. To mute the audio device, select the Mute option located on the Audio Configuration page.
7.Click the Save button to save the settings, or click the Reset button to clear all of the information you entered without saving it.
48 |
