Handlers
Figure 36. New Event Handler Page
Event handlers are the actions that the camera takes when an event occurs. The camera supports four event handlers.
Send Email: Sends an email to a defined email address when an event is activated. The SMTP server must be configured to accept the camera IP address.
Write JPEG to SD Card: Saves a JPEG of the activated event to a mini SD card. An SD card must be installed in the device for this handler to function.
NOTE: The mini SD card must be formatted as FAT32. Other formats are not compatible with the camera.
Upload JPEG to FTP Server: Saves a JPEG of the activated event to a defined FTP server.
Refer to the following sections for more information:
•Creating an Alarm Event Source on page 56
•Creating a System Event Source on page 56
•Creating a Timer Event Source on page 56
•Editing an Event Source on page 56
•Deleting an Event Source on page 57
•Creating an Event Handler: Send Email on page 57
•Creating an Event Handler: Write JPEG to SD Card on page 58
•Creating an Event Handler: Upload JPEG to FTP Server on page 58
•Creating an Event Handler: Open/Close Relay on page 59
•Editing an Event Handler on page 59
•Deleting an Event Handler on page 59
•Example Handler Filter Setup on page 60
55 |
