Service 31
EN
10 Wait until INSERTCARD appears on the display.
Push the Plug’n’Print card of the new toner cartridge
into the opening on the left side next to the paper tray,
with the contacts facing to the left.
11 It may take a moment to update the cartridge. When
the process is completed, the following appears on the
display: ACTION COMPLETED / EJECT CARD.
12 Pull the Plug’n’Print card out of the device.
Restart the Recharging Process
1Press OK, 62 and OK.
2Using [ select NEW BLACK.
3Confirm with OK.
4Using [ select YES. After a short time, the device will
ask you to insert the Plug’n’Print card.
Toner Level Memory 3
Displaying the Toner Level
Toner Level Memory 2
1Press OK, 62 and OK.
2Select with [CART CAPACITY.
3Confirm with OK. The toner level of the toner car-
tridge is indicated by a percentile value between 100
percent (full) and 0 percent (empty).
Fixing a Paper Jam
Introduction
Your device is equipped with sensors that quickly recognise
a paper or document jam. If trouble of this sort arises, the
feeding of the printer paper or document is stopped imme-
diately.
1Open the cover by taking hold of both document
guides and tipping the cover backward.
2It is possible that you will have to remove the toner car-
tridge in order to reach the paper.
Should the error message UNREADABLECARD
appear on the display, you may have inserted the
Plug’n’Print card incorrectly. The contacts must
face to the left as you insert the card into the de-
vice.
You can interrupt the recharging process at any
time, by pressing j. However, the toner level
memory must be updated for each new toner car-
tridge.
If the toner level of the cartridge is low, then every
time you open and close the cover, the following
question will appears on the display:
BLACK=NEW?. If you have not installed a new car-
tridge, press j. If you have installed a new cartridge,
press OK and follow the description set forth above.
Whenever you insert a new toner cartridge, you must
update the toner level memory of your device with
the Plug’n’Print card that is included with the new
cartridge. Your device registers the extent of toner us-
age for every print-out and calculates the toner level
of the cartridge based on this. The indicated toner
level is only meaningful if you update each new toner
cartridge with the Plug’n’Print card that is provided
with the cartridge.
Carefully remove the toner cartridge from the de-
vice so that no toner dust spills out. Take care
where you place the toner cartridge, escaping ton-
er dust may soil the surface.