Initial Operation 9
EN
3Press the paper down until the lever (A) snaps into
place at the rear of the paper tray.
4Place the cover back on the paper tray. Push the paper
tray into the device all the way to the stopping point.

Extending the Printout and Fax

Outlet Tray

Extending the Pri ntout and Fax Outlet Tray
Pull the print-out and fax outlet tray out of the paper tray
cover.
Druckausgabe rausziehen

Attaching the Document Outlet

Tray

Attaching the Document Outl et Tray
Insert the document outlet tray into the two openings un-
der the operation panel.
Dokumentenausgabe anbringen

Connecting the Telephone Hand-

set

Type 3 (mit Telefon)
(LPF¦925, LPF¦935)
Connecting the Ha ndset
Plug one end of the spiral cable into the socket on the tel-
ephone handset. Insert the other end into the socket desig-
nated with the ) symbol.
Telefonhörer anschließen

Inserting Starter Cartridge

Plug’n’Print Card
Before you can receive documents, make copies, or print,
a toner cartridge must be inserted into the device. For this
reason, a starter cartridge is supplied with the device. The
toner level memory for this starter cartridge was set at the
factory. The starter cartridge need not be updated with a
Plug’n’Print card. For each additional toner cartridge that
you insert into your device, you must update the toner lev-
el memory with the Plug’n’Print card provided.
1Open the cover by taking hold of both document
guides and tipping the cover backward.
2Take the new toner cartridge from the package.
3Remove the black protective foil and other packaging
material, but do not yet remove the protective
strip from the cartridge.
4Shake the new toner cartridge back and forth several
times in order to distribute the toner evenly, thereby
improving the print quality.
Do not pull out the paper tray while the device is
in the process of printing. This can lead to a paper
jam.
Never open a toner cartridge. If toner dust is re-
leased into the air, you should avoid allowing it to
contact your skin and eyes. Do not inhale the re-
leased toner dust. Remove the toner dust from
clothing or objects with cold water; hot water
would only cause the toner to set.