Introduction
Congratulations on the purchase of your new Pioneer CD-ROM Changer! The unit is packaged with floppy disks that contain device drivers necessary for connecting the Pioneer CD-ROM Changer to an IBM-PC or compatible computer or to a Macintosh computer. The device drivers allow the CD-ROM Changer and the computer to communicate and exchange data. On the next page is a SET UP & DRIVER INSTALLATION OVERVIEW describing the steps to follow as you install the device driver software and begin using your Changer.
Before you proceed, make sure you have fully reviewed the Hardware Installation Owner’s Guide that is included with your Pioneer CD-ROM Changer. The Hardware Installation Owner’s Guide provides safety precautions, system requirements, hardware installation procedures, and other pertinent information.
Also, carefully review the instructions in this manual prior to installing the software device drivers. Here is a synopsis of what you will find in each chapter.
Chapter 1 provides the Introduction to this Manual, a synopsis of subsequent chapters, and a Set Up & Driver Installation Overview.
Chapter 2 provides Pre-Installation Notes. This section recommends that you back-up the driver diskettes. It also explains conventions used in the manual and provides some tips for IBM-PC and Compatible computer users: Make sure your SCSI host adapter (interface card) supports Multiple LUNs; Refer to Context-Sensitive ON-LINE Help during installation of drivers under DOS or Windows; Selection methods.
Chapter 3 provides an IBM-PC and Compatibles Driver Diskette Inspection Checklist; describes Quick Installation; Operations Check; Custom Installation Options; Installing more than one Pioneer CD-ROM Changer and using XDISC; Using the MPC utility included on the driver diskette.
Chapter 4 describes the Macintosh Driver Installation Process: Installation Overview; Inspection Checklist; Quick Installation; Operations Check; Other Installation Options/ Installing more than one Pioneer CD-ROM Changer; Using the CLD ACCESS ROM Controller and the Menu icon; Using CLD REMOTE.
Chapter 5 provides information about Special Issues such as Third Party Device Drivers; Networking; Maximizing Performance; Audio on CD-ROMs; Compressed Audio and Digital Audio; Sound Cards; Kodak Photo CDs.
Chapter 6 is Questions and Answers.
Owner’s Manual / Software Driver Installation Guide | 1-1 |
