Chapter 4

MACINTOSH Driver Installation

 

 

Using the Installer with System 7.0 and Above

Launch the installer that ships with the diskette to automatically install the drivers and files that are needed by the Macintosh to communicate with the Pioneer CD-ROM Changer. NOTE: Remove all virus protection software or other INITs that may conflict from your System Folder while you are installing the Pioneer drivers. Don’t forget to replace them in the System Folder after installation of the Pioneer drivers is complete. You will see this screen when you launch the installer:

M a c i n t o s h H D

Figure 19 - MACINTOSH Installer Screen

Click on INSTALL to automatically install the necessary files. HELP informs you of the functionality of different buttons. Make sure that you are running the install program from the PIONEER diskette that ships with the drive. Select CUSTOMIZE to select specific files to install. This option is useful if you only need to install CLD-Access (the driver) but do not need to install the specific Extensions. The dialog box in the lower left side of the Custom Install Screen describes each highlighted item.

Figure 20 - MACINTOSH Custom Install

Owner’s Manual / Software Driver Installation Guide

4-3