Chapter 4

MACINTOSH Driver Installation

 

 

Using CLD Access

CLD Access is a control panel document. Select Control Panels from under the Apple Menu, then double click on CLD Access or go into the System Folder and open Control Panels Folder, then double click on CLD Access to launch it. You will see the ROM Mount Controller dialog box:

CLD Access

Figure 22 - CLD Access / ROM Mount Controller

This controller indicates the SCSI ID number of the Pioneer CD-ROM Changer. And it also shows the discs loaded into the Pioneer Changer. If there is an X in the box next to the title and the title is in black lettering, you know the disc is mounted. NOTE: To the left of the title, you will see a musical note, if as in the example above, the CD-ROM contains CD-Digital Audio.

Multi-Mount Option

Unless Multi-Mount is selected, the drive will unmount the disc currently mounted and mount the next disc selected. Click on the Multi-Mount box if you wish to have more than one disc mounted on the desktop at one time.

CLD Menu Option

If the CLD Menu box is selected, you will see the CLD Menu icon below appear at the far right hand side of the Macintosh’s top menu bar. Select CLD Menu by checking the box in the lower left hand corner of CD-ROM Controller dialog box and restart computer. On boot up, you will see the icon on the menu bar. Clicking on this icon will allow you to select mounted discs from the desktop, without having to bring up CLD Access.

4-6

Software Driver Installation Guide / Owner’s Manual