Chapter 3

IBM DOS / WINDOWS Driver Installation1

 

 

To accept the QUICK INSTALL Parameters press the [ENTER] key from anywhere in the menu, or click on <ENTER>-Acceptin the lower right corner of the menu. Then, the following screen will pop-up:

If you are not satisfied with the options you chose, select NO. Then press the [Esc] key to go back one menu at a time. If you are satisfied with the options,

Pioneer CD-ROM Installer Ver 2.0

Install Parameters

Installation Completed Successfully!

For the changes to take effect you must

EXIT the Install Program and reboot your machine using CTL+ALT+DEL.

select YES to start the installation. To abandon the installation, select EXIT, at the main menu.

After you select YES, the installation process will begin. While the program is installing the necessary files, a screen with “PLEASE WAIT” will blink.

Once the installation is complete, the following Dialog Box will appear:

Figure 9 - DOS/WINDOWS Installer: Installation Complete

To exit the installation program, follow these steps:

1: Press the [ESC] key twice to return to the main menu.

2: Press the Down

arrow key to move to the EXIT menu

 

 

3-6

Software Driver Installation Guide / Owner’s Manual