MACINTOSH Driver Installation

Chapter 4

 

 

This is the message you will see when installation is completed successfully:

Mac

Figure 21 - MACINTOSH - Successful Install Screen

Click on QUIT, to leave the installer. NOTE: Replace any virus protection software or other inits you may have removed for this installation back into the System Folder. Restart your computer.

Installing drivers for System 6.0.7 and below

You will need to click on specific files and drag them into the System Folder if you are using System 6.0.7 or below. NOTE: ONLY use the installer for Macintosh Systems 7.0 and above.

Double click to open the Pioneer Macintosh diskette that ships with your Pioneer CD-ROM Changer. Then double click on the 6.0.7 Folder, to open it. Inside this folder you will see the file CLD Access 1.2. Highlight this file, hold the mouse button down, and drag it over the System Folder icon for System 6.0.7 or below. When the System Folder is highlighted, you can release the mouse button.

Then double click on the CD-ROM Folder contained on the Pioneer diskette. Select these four files by clicking on them, while simultaneously holding down the shift key: Audio CD Access, Foreign File Access, ISO 9660 File Access, and High Sierra File Access. When they are all highlighted, drag them over the System Folder icon for System 6.0.7 or below. As described above, when the System Folder is highlighted, you can release the mouse button.

4-4

Software Driver Installation Guide / Owner’s Manual