Chapter 3

IBM DOS / WINDOWS Driver Installation

 

 

Device Driver Parameters

Pioneer CD-ROM Installer Ver 2.0

Figure 13 - DOS/WINDOWS - Driver Parameters Menu

MSCDEX Device Name

This is the label that will be declared in both the MSCDEX Device Driver line in the AUTOEXEC.BAT and the Pioneer Device Driver line in the CONFIG.SYS. The label name must match in both files.

Use EMS Memory

The drivers and MSCDEX can be loaded into Expanded memory by selecting this option. This will be indicated by the /E switch found in the device driver line of the CONFIG.SYS and in the MSCDEX driver line of the AUTOEXEC.BAT. See Appendix C for details: Driver Command Line Switches and MSCDEX Command Line Switches. If the computer does not have expanded memory, the drivers are loaded into conventional memory.

NOTE: If you are using a memory manager, you may need to reconfigure it after installation unless you switch the EMS Memory option to “NO”.

Install Pioneer CDP Support

Installing this option allows the player to be controlled by CD Player Commands, See Appendix D.

3-10

Software Driver Installation Guide / Owner’s Manual