Chapter 3

IBM DOS / WINDOWS Driver Installation

DOS /WINDOWS device driver installation Inspection Checklist / PC

Pioneer® Changers are packaged with a floppy disk containing software device drivers and the MSCDEX file for IBM-PC and compatible computers. The disk also contains an Installation program, Installation Help file, a file to load and remove the MPC control utility and XDISC, a program that allows assignment of one drive letter to each daisy-chained drive. Before you proceed with the installation, verify that you have the necessary files on the diskette:

Step 1: Exit your current computer application and go to the DOS prompt.

Step 2: Insert the diskette into the “A” or “B” drive, depending on your system configuration;

Step 3: Type: DIR A: or DIR B: indicating the drive where the diskette has been inserted and press [ENTER]. C:>DIR A:

The following file names should be listed on the screen:

1.INSTALL.EXE

2.MSCDEX.EXE

3.DRD600.SYS

4.DRD60PS.SYS

5.DRD60ASP.SYS

6.INSTALL.CWA

7.INSTALL.HLP

8.MPC.COM

9.MPCRMV.COM

10.README.DOC

11.XDISC.EXE

If your disk does not contain all of the files listed above, please contact your Authorized Pioneer Dealer or call the Pioneer Bulletin Board System using your computer, modem and computer software to obtain current drivers. (See Appendix F, Pioneer Technical Resource Numbers for Pioneer BBS number.)

After you’ve verified the contents of the disk, proceed to the next page for QUICK INSTALLATION instructions.

Owner’s Manual / Software Driver Installation Guide

3-1