Figure 7 - Select Correct SCSI Host Adapter / Overview

IBM DOS / WINDOWS Driver Installation

Chapter 3

Indicate the SCSI Host Adapter you have installed

If you are using a Future Domain SCSI Host Adapter, accept the default setting: Future Domain is highlighted. Press [ENTER].

If you are not using a Future Domain SCSI Host Adapter, press the [F3] key to bring up the adjacent menu and then, select the name of the host adapter (interface card) you are using, ASPI , DD-C5002, Future Domain, or IBM. NOTE: ASPI refers to ASPI compatible cards, such as Adaptec, etc.

Keyboard

Use the Up and Down arrow keys to highlight your selection then press [ENTER] to confirm.

Mouse

Click on the selection with the mouse. Double Click to accept, or press [ENTER].

✓Note: If you are using an ASPI Compatible host adapter, make sure you first load the ASPI Manager provided by the card manufacturer. This software must

be loaded BEFORE the Pioneer drivers.

accept the default selection or Press

[F3] to bring up the adjacent menu that allows you to select a different host adapter. Use the UP or DOWN arrow keys, or a mouse to indicate the kind of SCSI host adapter you are using. See Figure 6.

Pioneer CD-ROM Installer Ver 2.0

Figure 8 - DOS/WINDOWS Installer: To Begin Installation

Owner’s Manual / Software Driver Installation Guide

3-5