Chapter 3

IBM DOS / WINDOWS Driver Installation

 

 

 

 

These default settings are suitable for most computer configurations. If you need to change the settings, refer to the QUICK INSTALL Parameters on page 3-5.

If you choose to over-ride the Auto SCSI ID Search feature using the Custom Install options, make sure the SCSI ID number selected in the Custom Install matches the number indicated on the back of the Pioneer CD-ROM Changer.

Quick Install Parameters

Pioneer CD-ROM Installer Ver 2.0

ASPI

DD-C5002

Future Domain

IBM

Figure 6 - DOS/WINDOWS - Select SCSI Host Adapter

The default settings work well with most computer configurations. Most basic changes can be made by modifying the Quick Install Parameters, as described below:

Boot Drive - The drive from which MS DOS will boot.

The default DOS boot drive is C. To change the drive letter, highlight the menu selection for the DOS BOOT DRIVE, press the [F3] key to edit, type in the replacement drive letter and press the [ENTER] key.

Path - The directory path indicating where all the driver files will be copied. The default path is C:\PIONEER. To change the path, highlight the menu selection for PATH TO INSTALL DRIVER, press the [F3] key to edit and then type in the replacement path name.

SCSI host adapter - Indicates the adapter to which the CD-ROM Changer is connected. The default setting for the SCSI host adapter is Future Domain. Either

3-4

Software Driver Installation Guide / Owner’s Manual