Pioneer DVR-645H-S, DVR-545H-S manual Initial Setup menu Chapter, Using the Initial Setup menu

DVR645H_WY_EN.book 132 ページ ２００６年７月５日 水曜日 午前１０時２５分

16The Initial Setup menu

Chapter 16

The Initial Setup menu

Using the Initial Setup menu

The Initial Setup menu is where you can set various recorder options for sound, picture, language and so on.

Some settings can only be changed when the recorder is stopped. During playback and recording these settings are grayed out in the Initial Setup menu.

Except for the Setup Navigator, menu screens are exited automatically after 20 minutes of inactivity.

•Press HOME MENU and select ‘Initial Setup’.

In the table below, the default option is marked with a •.

Setting	Options	Explanation
Basic
Clock Setting	Auto	Set the channel that broadcasts a clock signal and
		the clock will be set automatically.
	Manual •	If there is no channel that broadcasts a clock signal
		in your area, you can set the time and date manually.

The clock must be set in order to use timer recording.

Input Line System 525 System		Use for NTSC or PAL-60 recording from an external
		input.
	625 System •	Use for standard PAL or SECAM recording.

See also About the input line system on page 144 for more information on this setting.

Power Save	Mode 1	Only signals arriving at the antenna input are passed
		through to the antenna output when the recorder is
		in standby.
	Mode 2	No input signals are passed through to the outputs
		when the recorder is in standby.
	Off •	When the recorder is in standby, all signals arriving
		at the SCART and antenna inputs are passed along
		to the outputs.

132

En