Pioneer DVR-645H-S, DVR-545H-S manual Recording Basic recording from the TV

DVR645H_WY_EN.book 60 ページ ２００６年７月５日 水曜日 午前１０時２５分

06Recording

Basic recording from the TV

DVD (VR) DVD (Video) DVD+R DVD+RW DVD-RAM

HDD

Basic recording from the TV involves just setting the channel to record, choosing whether to record to the HDD or a DVD and selecting the recording quality.

HDD/DVD

1 Select the HDD or DVD for recording.

•If you’re recording to DVD, load a recordable disc (if you load a new blank DVD-RW or DVD+RW disc, the recorder takes a short while to initialize the disc).

•If you want to record a VR mode DVD-R or a Video mode DVD-RW, you must initialize it before proceeding (see Initializing recordable DVD discs on page 70).

CHANNEL

+

2	–	Select a TV channel to record.
	CHANNEL

The front panel display shows the channel number:

SHIFT REC MODE

3 + Set the picture quality/ recording time.

•See Setting the picture quality/recording time on page 59 for detailed instructions.

SHIFT AUDIO

4 + Select the audio channel to record.

See Changing audio channels on page 58 for more on this.

•When recording in VR mode, if a broadcast is bilingual, both audio channels are recorded, allowing you to switch the audio channel on playback. The only exception to this is when the picture quality is set to LPCM, in which case you do need to select the audio channel before recording.

REC

5 Start recording.

If you want to set a recording end time, press the REC button repeatedly. The recording time increases in 30 minute increments, up to a maximum of six hours. The time the recording will end is shown on-screen and in the front panel display. When the recording ends, the recorder automatically switches into standby if no other operation is being performed.

•To cancel the set recording time, press REC.

Channel preset • If you want to pause recording at any

•While the recorder is stopped, you can also use the number buttons on the remote to select the channel (e.g., for channel 24, press 2, 4 then ENTER).

•If the recorder is stopped, you can also use the CH +/– buttons on the front panel to select the channel number.

time1, press PAUSE. Press again to restart the recording (If recording to the HDD, DVD-RAM or in VR mode, a new chapter is started after recording restarts).

Note

1 Except during Chase Play.

60

En