DVR645H_WY_EN.book 144 ページ 2006年7月5日 水曜日 午前10時25分

16The Initial Setup menu

Setting

Options

Explanation

AV. Link

This Recorder

Signals received through the AV input when the

 

Only •

recorder is in standby are not passed through to the

 

 

AV output.

 

 

 

 

Pass Through

Signals received when in standby are passed though

 

 

to the output for connected devices. (Note that

 

 

during EPG data download, the EPG data is not

 

 

passed through.)

When set to Pass Through, make sure to set Power Save (page 132) to Off.

DivX VOD

Registration Code

Use to display the recorder’s DivX registration code.

 

 

See DivX video compatibility on page 10 and DivX®

 

 

VOD content on page 11.

 

 

 

Set Preview

Quick Preview •

When in the Disc Navigator, the thumbnail video

(HDD only)

 

plays short excerpts from throughout the selected

 

 

title. (Note that edited titles that will play normally

 

 

from the beginning.)

 

 

 

 

Normal

The thumbnail video plays from the beginning of the

 

 

title.

 

 

 

Additional information about the TV system settings

About the input line system

This recorder is compatible with PAL, SECAM, 3.58 NTSC and PAL-60 TV systems. The Input Line System and Input Colour System settings determine how the recorder treats incoming video signals from an external input or the built-in TV tuner.

Please note the following points when changing the input line system:

When the current input is a built-in tuner channel preset, changing the input line system will usually also affect the input line system of the AV2 (INPUT 1/ DECODER) input. However if the AV2/L1 In setting is set to Decoder, then the L2 input is affected instead.

If, when the Input Line System setting is changed, the screen goes blank (due to incompatibility with your TV), you can switch back by pressing and holding the front panel STOP button then pressing

OPEN/CLOSE (also front panel) while the recorder is stopped.

When you switch the Input Line System setting the Copy List is erased. If you

switch the setting using the STOP button and OPEN/CLOSE buttons as described above, there is no confirmation, so please use with care.

You can’t mix recordings of different TV line systems on the same disc.

When you change this setting, the Input Colour System setting also changes (see below).

144

En

Page 144
Image 144
Pioneer DVR-645H-S Additional information about the TV system settings, About the input line system, Only, Pass Through