Pioneer DVR-545H-S, DVR-645H-S Setting up for Pause Live TV, TV tuner setup for Pause Live TV

DVR645H_WY_EN.book 61 ページ ２００６年７月５日 水曜日 午前１０時２５分

Recording 06

STOP REC

6 Press to stop recording.

•If you set the recording time in the previous step, you can still stop the

recording anytime by pressing STOP REC.

•Recording will stop automatically when there is no more space on the HDD/ DVD, or after 12 hours of HDD recording (whichever is sooner).

If VPS/PDC is active for two timer programs that are programmed to start at the same time, then the program that actually starts first takes priority.

Tip

•During recording you can turn on/off the SCART loop through function. During recording, press the front panel CH + button to switch to SCART THRU (loop through on), or CH – to switch to SCART NORM (loop through off). Loop through is automatically reset to off after recording has finished. Note that you can’t switch loop through on if recording from the AV2/(INPUT 1/DECODER) or AV1(RGB)-TVconnectors.

Pause Live TV

Setting up for Pause Live TV

You can use the Pause Live TV feature with an AV Link-compatible TV connected using a SCART cable (see TV tuner setup for Pause Live TV below), or using this recorder’s internal tuner (see Using the recorder’s internal tuner for Pause Live TV below).

TV tuner setup for Pause Live TV

To use this feature with an external TV tuner, the recorder must be connected to your TV using a SCART cable, and the AV Link setting (page 144) should be set to This Recorder

Only.1 See also Pause Live TV on page 133 for more on this.

In order to use Pause Live TV, make the following connections and settings.

•Pause Live TV will not work as expected when watching TV via an external component such as a VCR or digital tuner. It only works with the channel selected on the TV.

1Connect this recorder to your TV with a SCART cable.

2Press HOME MENU.

3Select ‘Initial Setup’ > ‘Analog Tuner’ > ‘Auto Channel Setting’ > ‘Download from TV’.

•If the Download from TV option appears grayed out, check the connections to your TV and try again.

HDD

The Pause Live TV feature lets you effectively pause a TV program you’re watching. When you’re ready to resume watching, just press the PLAY button.

•Depending on your TV, you might have to switch off and unplug it for a few moments before plugging it back in and switching on.

4 Follow the on-screen instructions.

Note

1 • Not all TVs support this feature. Check the instructions that came with your TV if you’re not sure.

•This feature will not work unless your TV is compatible with AV Link. See the operating instructions that came with your TV if you’re unsure about your TV’s compatibility with this feature.

61

En