Pioneer DVR-545H-S manual Recording from an external Component, Stop, Select the HDD or DVD for

DVR645H_WY_EN.book 67 ページ ２００６年７月５日 水曜日 午前１０時２５分

Recording

06

You can use all the usual playback controls, such as pause, slow-motion play, scan and skip.

• To stop playback, press	STOP
(recording will continue).
• To stop recording, press	STOP REC
(playback will continue).

•During recording or in timer recording standby, you can’t play an HDD title, DVD or Video CD/Super VCD disc if the Input Line System setting doesn’t match the TV line system of the disc/HDD title (see also Additional information about the TV system settings on page 144). Also, during simultaneous recording and playback, if the TV line system of the playback track/title changes then playback will automatically stop.

•AV2/L1 – Input 11

•L2 – Input 2 (front panel)

•L3 – Input 3

Check that the Audio In settings for External Audio and Bilingual Recording are as you want them (see Audio In on page 136).

•If the aspect ratio is distorted (squashed or stretched), adjust on the source component or your TV before recording.

•DVR-645H-S only: To watch video coming in via the DV input (front panel), select DV > DV Video Playback from the Home Menu (see also Playing from a DV camcorder on page 85).

SHIFT REC MODE

3 + Set the recording quality.

•See Setting the picture quality/recording time on page 59 for detailed information.

Recording from an external

component		HDD/DVD
	4	Select the HDD or DVD for

recording.

DVD (VR) DVD (Video) DVD+R DVD+RW DVD-RAM

HDD

You can record from an external component, such as a camcorder or VCR, connected to one of the recorder’s external inputs.

1Make sure that the component you want to record from is connected properly to the DVD recorder.

See Chapter 2 (Connecting up) for connection options.

REC

5 Press to start recording.

•If your source is copy-protected using Copy Guard, you will not be able to record it. See Restrictions on video recording on page 57 for more details.

INPUT SELECT

2 Press repeatedly to select one of the external inputs to record from.

The current input is shown on-screen and in the front panel display:

Note

1 This cannot be selected if AV2/L1 In is set to Decoder (see AV2/L1 In on page 135).

67

En