Pioneer DVR-545H-S, DVR-645H-S manual DVR645HWYEN.book 21 ページ ２００６年７月５日 水曜日 午前１０時２５分

DVR645H_WY_EN.book 21 ページ ２００６年７月５日 水曜日 午前１０時２５分

Connecting up

Connecting an external decoder box (2)

If you only have a decoder, connect it to this recorder and your TV as shown on this

page.1

Using the setup on this page you can:

•Record scrambled channels received using the recorder’s built-in TV tuner.

Important

•Do not connect this recorder ‘through’ your VCR, satellite receiver or cable box. Always connect each component directly to your TV or AV amplifier/ receiver.

SCART AV	ANTENNA
CONNECTOR
	IN
2
	TV
	1

ANTENNA

IN (RF IN)

Y IN

AC IN	AV 1 (RGB) – TV			PB	OUTPUT		AV 2 (INPUT 1/DECODER)
	DIGITAL	CONTROL					L
	OUT				R	L			OUT
				PR
	COAXIAL	IN	G-LINK	COMPONENT		AUDIO	VIDEO	S-VIDEO	ANTENNA
				VIDEO OUT			INPUT3

ANTENNA

OUT

3

1

SCART AV

CONNECTOR

Antenna/cable TV

Decoder wall outlet

02

1Connect RF antenna cables as shown. This enables you to watch and record TV channels.

2Use a SCART cable (not supplied) to connect the AV1(RGB)-TV AV connector to a SCART AV connector on your TV.

This enables you to watch discs.

3Use another SCART cable to connect the AV2(INPUT 1/DECODER) AV connector to a SCART AV connector on your decoder box.

This enables you to record scrambled TV channels.

Note

1 In order to use this setup, you will need to make the following settings from the Initial Setup menu:

•Set the AV2/L1 In setting to Decoder from the Initial Setup menu (see AV2/L1 In on page 135).

•From the Manual CH Setting screen, set the Decoder setting for the scrambled channels to On (see Manual CH Setting on page 134).

21

En