The Initial Setup menu
16
142
En
Angle Indicator On •
A camera icon appears on-screen during multi-angle
scenes on a DVD-Video disc.
Off
Nothing is indicated on-screen when a multi-angle
scene is showing.
HDMI Output
(only available when an HDMI device is connected)
Screen Resolution 1920 x 1080i
Constant 1920 x 1080i output.
1280 x 720p
Constant 1280 x 720p output.
720 x 576p
Constant 720 x 576p output (for use with the 625
input line system).
720 x 480p
Constant 720 x 480p output (for use with the 525
input line system).
720 x 576i
Constant 720 x 576i output (for use with the 625 input
line system).
720 x 480i
Constant 720 x 480i output (for use with the 525 input
line system).
If you choose a setting that is incompatible with your TV you may not be able to see any picture at all. In this case,
press
(
PLAY
) while holding down the
(
STOP
) button on the front panel to switch the setting (this also
switches Component Video Out
on page 135
to the default setting).
4:3 Video Output Full
Select if your HDMI TV allows you to change the
aspect ratio.
Normal
Select if your HDMI TV does not allow you to change
the aspect ratio. 4:3 video will be shown with bars on
each side (unless the
Screen Resolution
setting
(above) is set to
720 x 480i
or
720 x 576i
).
Colour RGB (0–255)
Use if colours are weak and black appears to ���float’
on the
RGB (16–235)
setting.
RGB (16–235)
Use this setting if colours appear overly rich and the
black too deep on the
RGB (0–255)
setting.
YCbCr 4:2:2
The video signal is output as a 10-bit YCbCr 4:2:2
component signal. This is the standard setting for
HDMI-compatible devices.
YCbCr 4:4:4
The video signal is output as a 8-bit YCbCr 4:4:4
component signal.
• Depending on the connected device some settings may not be available.
• When a DVI device is connected, the YCbCr 4:2:2 and YCbCr 4:4:4 options are not available.
Setting Options Explanation
DVR645H_WY_EN.book 142 ページ ２００６年７月５日　水曜日　午前１０時２５分