Pioneer DVR-645H-S Screen is stretched, Vertically or, Horizontally, Recorded using this, Player

DVR645H_WY_EN.book 150 ページ ２００６年７月５日 水曜日 午前１０時２５分

17Additional information

Problem	Remedy
Screen is stretched	• Make sure that the TV Screen Size setting (page 141) is correct for
vertically or	the kind of TV you have (see also page 158).
horizontally	• If you have a widescreen TV, check its aspect ratio settings.
	• This recorder’s input switches into wide mode automatically
	according to the input signal. When the unit connected is not
	compatible with VIDEO ID-1 (widescreen signalling), set the
	connected component to output 4:3 aspect ratio (standard) video.
Can’t play a disc	• If the disc was recorded in Video mode or DVD+R, make sure that
recorded using this	it’s finalized (page 68).
recorder on another	•Some players will not play recordable DVD discs, even when
player	recorded in Video mode and finalized.
	• If the disc was recorded in VR mode, the other player must be
	specifically RW compatible in order to play it (page 7).
	• Discs recorded with copy-once material cannot be played on non-
	CPRM compatible players (page 57).
	• DVD+RW discs containing only a small amount of recorded
	material may not play on other players. Finalize the disc and try again.

During playback the picture is dark or dis- torted

•When a copy-protected disc is played via a VCR, the picture will not display correctly. Connect the recorder directly to your TV.

Can’t record or does • Check that there is some remaining blank space on the DVD/HDD. not record successfully • For a Video mode disc or DVD+R, check that the disc isn’t already

finalized.

•Check the limits on the number of titles and chapters on a disc:

–HDD: 999 titles

–VR mode: 99 titles, 999 chapters per disc

–Video mode disc: 99 titles per disc, 99 chapters per title

–DVD+R/+RW: 49 titles per disc, 99 chapters per title (max 254 chapters per disc)

•Check that the source you are trying to record is not copy protected.

•For a VR formatted disc, check that the disc isn’t locked (page 125).

•Check that you are recording with the same TV system (PAL, NTSC, etc.) as the disc has already been recorded in. All recordings on a disc must be in the same TV system. When recording to the HDD, it is also necessary to set the Input Line System setting to match what you want to record (page 144).

•The power may have failed during recording.

150

En