Pioneer DVR-645H-S, DVR-545H-S manual Manual CH Setting Next Screen, Channel Swapping Next Screen

DVR645H_WY_EN.book 134 ページ ２００６年７月５日 水曜日 午前１０時２５分

16The Initial Setup menu

Setting	Options	Explanation
Manual CH Setting	Next Screen	Proceed to the next screen if you need to adjust any
		of the settings made by auto tuning. Select your
		country, then proceed to the manual channel setting
		screen:
		• Change channel presets using the	PREV
		NEXT buttons.
		• To skip the displayed channel (because there is no
		station assigned to that channel), change the Skip
		setting to On.
		• Set the CH SYSTEM setting to match the channel
		system of your country or region.
		• Set the CHANNEL setting to the channel you want
		to assign to the current channel preset.
		• To manually fine tune the channel, change the AFT
		setting to Off then adjust the Level setting.
		• Set the Sound System setting to match the sound
		system of your region.
		• The Name field allows you to input a name of up to
		five characters for the current channel preset.
		• If the currently selected channel is scrambled
		requiring a decoder connected to the AV2 (INPUT 1/
		DECODER), set the Decoder setting to On.
Channel Swapping	Next Screen	Proceed to the next screen to swap channel
		assignments of different presets so that you can
		group together presets that naturally go together.
		Select two presets to swap then press ENTER.
Video In/Out
Input Colour	Next Screen	Proceed to the next screen to set the input colour
System		system for the external input and the built-in TV
		tuner. Use the CHANNEL +/– buttons to change the
		preset. On the default Auto setting the recorder can
		generally correctly detect whether the input signal is
		PAL, SECAM, 3.58 NTSC or PAL-60, but in some
		cases you may have to set it manually if the picture is
		displayed incorrectly.

See also About the input colour system on page 145 for more information on this setting.

134

En