Pioneer DVR-645H-S, DVR-545H-S manual Getting started Chapter, Switching on and setting up

DVR645H_WY_EN.book 32 ページ ２００６年７月５日 水曜日 午前１０時２５分

04Getting started

Chapter 4

Getting started

Switching on and setting up

When you switch the recorder on for the first time, you can make several basic settings using the Setup Navigator feature. This takes you through setting the clock, the internal TV tuner and the video output.

If you’re using the recorder for the first time, we strongly recommend you use the Setup Navigator before starting to use the recorder.

1Switch on your TV and set the video input to this recorder.

STANDBY/ON

2 Switch on the recorder.

When you switch on for the first time, your TV should display the Setup Navigator screen (If the Setup Navigator doesn’t appear, you can also access it from the Initial Setup menu; see page 132).

•If this recorder is connected to a compatible TV using a fully-wired 21-pin SCART cable, the recorder will take a few seconds to download country, TV screen size and language information. (Check the manual that came with your TV for compatibility information.)

ENTER

3Choose a language (then press ENTER).

	Initial	Setup
	Basic		Clock SettingLanguage
	Tuner		Input Line System
	Video In/ O ut		Power Save
	Audio In		HELPp
	Audio O ut		Setup N avig ator
	Language
	Recording
	Playback
4	ENTER	Start the Setup Navigator.

k Setting

Complete this setup before you t Line System

start using your recorder. er Save

PStart

p Navigator Cancel

Please use the Initial Setup if you want to make more detailed settings.

• If you don’t want to use the Setup Navigator, press to select Cancel, then press ENTER to exit the Setup Navigator.

ENTER

5Select the Auto Channel Setting (‘Auto Scan’ or ‘Download from TV’), or ‘Do not set’.

k SettingAutoChannel Setting

Line System

er Save	AutoEnglishScan
P	Download from TV

p Navigator Do not Set

32

En