Pioneer DVR-545H-S manual Playing and recording from a DV camcorder DVR-645H-S

DVR645H_WY_EN.book 85 ページ ２００６年７月５日 水曜日 午前１０時２５分

Playing and recording from a DV camcorder (DVR-645H-S) 08

Chapter 8

Playing and recording from a

DV camcorder (DVR-645H-S)

You can play back and record video from a DV camcorder connected to the DV IN jack on the front panel of this recorder.

Important

•If you connect a second recorder using a DV cable, you cannot control the second unit from this one.

•You can’t control this unit remotely from a component connected to the DV IN jack.

Playing from a DV camcorder

1Make sure your DV camcorder is connected to the front panel DV IN jack.

• To record the incoming video, press HDD/DVD to select the HDD or a DVD for recording, then press REC. Press

STOP REC to finish recording.

If there is no signal from the device connected to the DV jack, or the signal is copy-protected, recording will pause. It will automatically restart once there is a recordable signal.

•The recorder will only start recording from the DV IN jack if there is a valid signal. Recording will pause if the signal is interrupted during recording.

•If your source is copy-protected using Copy Guard, you will not be able to record it. See Restrictions on video recording on page 57 for more details.

2From the Initial Settings menu, check that the DV audio input is setup as you require.

See DV Input on page 136 for more on this.

•Check also that the Audio In settings for External Audio and Bilingual Recording are as you want them (see Audio In on page 136).

HOME MENU

3 Select ‘DV’, then ‘DV Video Playback’ from the Home Menu.

4Start playback on the camcorder. Images from the camcorder should appear on your TV.

Recording from a DV camcorder

Using the recorder’s remote, you can control both the camcorder and this recorder.

Important

•The source signal must be DVC-SD format.

•Some camcorders cannot be controlled using this recorder’s remote.

•You can’t record date and time information from DV cassette.

85

En