Pioneer DVR-645H-S, DVR-545H-S Playback, Playing DVD discs, Start playback, DVD+R/DVD+RW only

DVR645H_WY_EN.book 72 ページ ２００６年７月５日 水曜日 午前１０時２５分

07Playback

PLAY

3 Start playback.

•If you’re playing a DVD-Video or Video CD, a disc menu may appear when you start playback. Use the

buttons and ENTER to navigate DVD disc menus, and the number buttons and ENTER for Video CD menus.

•When playing video from the HDD, playback will automatically stop after the end of a title is reached.

•There may be a slight pause when playback switches from the first to the second layer of a dual-layer disc.

•See the following sections for more details on playing specific kinds of discs.

STOP

4 Press to stop playback.

5When you’ve finished using the recorder, eject the disc and switch the recorder back into standby.

Playing DVD discs

The table below shows the basic playback controls for DVD-Video, and recordable DVD discs.

PLAY Press to start playback.

If RESUME is displayed on- screen, playback starts from the place last stopped.

			Press to stop playback.
	STOP
			You can resume playback from
			the same point by pressing
			PLAY. (Press STOP again
			to cancel the resume function.)
			Pauses playback, or restarts
		PAUSE
			playback when paused.
			Press to start scanning. Press
			repeatedly to increase the scan-
			ning speed.
			Press to skip to previous/next
PREV NEXT
			chapter/title. (During playback
			you can also use the front panel
			CH +/– buttons.)
			DVD+R/DVD+RW only:
			PREV may not always skip
			to the previous title.

REC MODE

AUDIO SUBTITLE ANGLE

PLAY MODE

CLEAR

ENTER

Except VR mode: During play- back, enter a chapter number then press ENTER to skip directly to that chapter within the currently playing title.

On some discs, you can also use the number buttons to select numbered items in the disc menu.

VR mode only: During playback, enter a title number then press

ENTER.

All: Press CLEAR to clear a number entry and start again.

72

En