Pioneer DVR-545H-S, DVR-645H-S manual Gamma Correction Adjusts the brightness of darker images

DVR645H_WY_EN.book 131 ページ ２００６年７月５日 水曜日 午前１０時２５分

The Video Adjust menu 15

•Subtitle Adjust – When the video output is set to progressive scan, it’s possible that the subtitles in some movies will disappear unnaturally. In this case select the On setting (only possible when connected using HDMI).

•YNR – Adjusts the amount of noise reduction (NR) applied to the Y (brightness) component.

•CNR – Adjusts the amount of noise reduction (NR) applied to the C (colour) component (only possible when connected using HDMI).

•BNR – Adjusts the amount of noise reduction (NR) applied to the block noise (artefacts visible in areas of flat colour, caused by MPEG compression).

•MNR – Adjusts the amount of noise reduction (NR) applied to the mosquito noise (artefacts visible around the edges of an image, caused by MPEG compression).

•Sharpness – Adjusts the sharpness of the high-frequency (detailed) elements in the picture.

•Detail – Adjusts how sharp edges appear.

•White Level – Adjusts the intensity of white.

•Black Level – Adjusts the intensity of black.

•Black Setup – Corrects the standard reference black level (NTSC video playback on the Interlace video output setting only). (Black Setup is ineffective for HDMI output.)

•Gamma Correction – Adjusts the brightness of darker images.

•Hue – Adjusts overall balance between red and green.

•Chroma Level – Adjusts how rich the colours appear.

4 Use the buttons to adjust the currently selected picture quality setting.

5When you have all the settings as you want them, press HOME MENU to exit.

Tip

•To see more of the picture as you adjust different settings, press ENTER after selecting the setting you want to adjust.

•YNR and Detail are ineffective for analog and component video when the Video Priority Mode is set to HDMI. Set to Component to make effective for both analog and HDMI video. See page 143.

131

En