Pioneer DVR-545H-S manual On-screen displays and recorder displays, Message Explanation/Action

DVR645H_WY_EN.book 153 ページ ２００６年７月５日 水曜日 午前１０時２５分

Additional information		17
Problem	Remedy
No video from the	If you choose a setting that is incompatible with your TV you may not
HDMI output.	be able to see any picture at all. In this case, press	(PLAY) while
	holding down the (STOP) button on the front panel to switch the
	setting (this also switches Component Video Out on page 135 to the
	default setting).

There’s no sound from the connected HDMI or DVI device.

•There is no sound when using a DVI terminal.

•Some HDMI-compatible devices do not output sound (check with the manual that came with the connected device).

If the unit does not operate normally due to external effects such as static electricity, disconnect the power plug from the outlet and insert again to return to normal operating conditions.

On-screen displays and recorder displays

The table below shows a list of error messages that you may encounter when using the recorder and an explanation of their meaning.

Message	Explanation/Action
• Initializing disc. Please wait a	When you load a blank DVD-RW or DVD+RW disc,
moment.	the recorder automatically initializes it.

•Incompatible region number.The disc loaded has an incompatible region number for the recorder and so will not play.

•Cannot record any more titles.

•No more space for file management data.

The disc control data limit has been reached, or the maximum number of chapters and/or titles has been reached. Erase titles/chapters or combine chapters.

•This disc cannot be recorded. Undo the finalization.

The disc was finalized on a non-Pioneer DVD recorder. Undo the finalization in order to recording/editing.

153

En