Pioneer DVR-645H-S manual Recording Using the built-in TV tuner, Changing audio channels, ENTER.1

DVR645H_WY_EN.book 58 ページ ２００６年７月５日 水曜日 午前１０時２５分

06Recording

Using the built-in TV tuner

There are three different ways to select TV channels. Note that you can’t change the TV channel during playback, recording or during recording standby.

CHANNEL

+

•	–	CHANNEL +/– buttons
	CHANNEL
REC MODE
AUDIO	SUBTITLE ANGLE
		PLAY MODE
•		Number buttons

For example, to select channel 4, press 4 then ENTER; for channel 34, press 3, 4,

ENTER.1

• CH +/– buttons on the front panel

Changing audio channels

You can change the audio channel of the broadcast or external input signal.

SHIFT AUDIO

• + Press to change the audio type.

The current audio channel is displayed on- screen.

•If the NICAM audio setting (see NICAM Select on page 136) is set to NICAM and you are watching a NICAM broadcast, you can switch between NICAM and Regular (non-NICAM) audio.

•If the NICAM broadcast is bilingual, you can also select the language.

NICAM A NICAM B

Regular NICAM A+B

•You can also select the language for a non-NICAM bilingual broadcast.

A (L) B (R)

A + B (L+R)

•When watching a recording made from an external input with Bilingual recording selected (see External Audio on page 136), you can switch the audio channel between left (L), right (R) or both (L+R).

L R

L+R

Note

•When recording to the HDD with HDD Recording Format set to Video Mode On, to DVD in Video mode, or on the LPCM setting, only one channel of a bilingual broadcast is recorded. In this case, decide which language you want to record before recording by setting the Bilingual Recording setting (see Bilingual Recording on page 136).

Switching between TV and DVD

NICAM

Regular

When the recorder is stopped or recording you can choose whether to have the audio/ video from the built-in TV tuner (or external input) play on your TV (‘DVD mode’), or watch the channel that the TV is currently set to (‘TV mode’).

Note

1 Channel presets are numbered 1 to 99.

58

En