Pitney Bowes DM350L manual Remove the Holder and Wick DM230L/DM330L

DM230L, DM330L, DM350L Operating Guide

Removing and

Cleaning the

DM230L/DM330L

continued…

5.Clean the brush in plain water, and rinse thoroughly.

6.Position the brush as shown above so its bottom edge is under the mounting tabs.

7.Slide the brush back toward the rear of the moistener.

Remove the Holder and Wick (DM230L/DM330L)
1.	Remove the holder and wick from	Holder
	the moistener as shown here.
2.	Clean the wick in plain water, and
	rinse thoroughly.	Wick

3.Place the wick in the holder.

4.Reinstall the wick and holder assembly.

Reinstall the Moistener Tank (DM230L/DM330L)

1. Line up the yellow tab with the yellow slot.

2. Slide the moistener tank into position on the mailing machine base until the release lever snaps into position. See the figure at right.

3. Resume operation.

SV61891 Rev. A 6-5