
This option allows you to setup the IGMP protocol and router port. From the Bridge menu, click on IGMP and then Protocol & Router Port. The following page is displayed:
| IGMP Router Port Setup | |
Label | Description | |
Modify | Click on this button to modify the IGMP configuration once you have set new | |
values for the parameters. | ||
| ||
|
| |
IGMP Version | Select the IGMP version. Options are: IGMP OFF, IGMP V1, IGMP V2, and | |
IGMP V3. | ||
| ||
|
| |
IGMP Mode | Select the IGMP mode. Options are: Snooping and Proxy. | |
|
| |
IGMP ACL Mode | Disable or enable ACL mode. IGMP ACL profile (refer to section 4.3.6) will | |
be effective only when ACL mode is enabled. | ||
| ||
|
| |
Deny No Alert | Enabled: the system will deny IGMP packets that have no router alert option | |
in their IP header. | ||
| Disabled: default value; the system will not care router alert option. | |
| Enabled: the system will limit the maximum active counter of IGMP groups | |
Max Groups Limit | can be joined (concurrently) for every bridge port. | |
Disabled: the system will not limit the counter of IGMP groups can be joined | ||
| ||
| for the bridge port. | |
|
|
- 131 -