
This option allows you to configure the ADSL spectrum profile. From the ADSL menu, click on Profile and then Spectrum Profile(main). The following page is displayed.
| ADSL Spectrum Profile setup | |
Label | Description | |
Select Index | Click on the | |
Options are: 1~4, 5~8, …, 117~120. | ||
| ||
|
| |
| This field shows the profile index. Click on the radio button beside the profile index | |
Index | to select the profile you want to modify or delete. | |
| ||
| Note that profile 1 (default) cannot be modified or deleted. | |
|
| |
Name | Type in the name of the profile. | |
|
| |
| Click on the radio button to select allowed power management mode. Options are | |
Power Mode | Disable (only L0 state allowed), L2 (L0 and L2 states allowed), L2L3 (L0, L2, and L3 | |
| states allowed). | |
|
| |
L0 Time | Type in the minimum time (in seconds) between Exit from L2 low power state and | |
the next Entry into the L2 low power state. Value range is 0 ~ 255. | ||
| ||
|
| |
| Type in the minimum time (in seconds) between an Entry into L2 low power state | |
L2 Time | and the first L2 low power trim request, and between two consecutive L2 power trim | |
| requests. Value range is 0 ~ 255. | |
|
| |
L2 ATPR | Type in the maximum aggregate transmit power reduction (in dB) that is allowed at | |
|
|
- 145 -