Valid values: xxx.xxx.xxx.xxx (xxx:0~255)

Default value: -

Type: Mandatory

5.4.99route default

Description Set default route

Syntax route default <ipv4 address>

Parameter

Name Description

<ipv4 address> Default route IP address.

Valid values: xxx.xxx.xxx.xxx (xxx:0~255)

Default value: -

Type: Mandatory

5.4.100 route delete

Description Delete routing from route table

Syntax route delete <ipv4 address> netmask <ipv4 address>

Parameter

Name Description

<ipv4 address> IP address.

Valid values: xxx.xxx.xxx.xxx (xxx:0~255)

Default value: -

Type: Mandatory

5.4.101 runningcfg active partition

Description There are two memory partitions for storing the configuration data. This command allows you to select the flash boot point (partition) for next power-on.

Syntax runningcfg active partition <number>

Parameter

Name

Description

<number>

Partition number

 

Valid values: 1~2

 

Default value: -

 

Type: Mandatory

 

- 275 -