Planet Technology IDL-2402 Name, Type, Note, Syntax, Syntax, Syntax, Parameter, Parameter, Parameter, Description, Description, Description, Description, Valid values, Default value:

5.7.32pvc atmdesc shp

Description Set ATM shaped (Tx) descriptor Syntax pvc atmdesc shp <number>

Parameter

Name	Description
<number>	ATM descriptor number.
	Valid values: Enter ‘pvc atmdesc’ command
	to see the descriptor list.
	Default value: -
	Type: Mandatory

5.7.33pvc encapsulation

Description Set Encapsulation type

Syntax pvc encapsulation {llc vcmux auto} Parameter None

Note: The IDL-2402 supports auto-detection of the ATM AAL5 encapsulation method, LLC or VC-Mux. Meanwhile, the IDL-2402 is also able to automatically sense the following protocol encapsulations: PPPoE over ATM (per RFC 2684), IPoE over ATM bridge mode, and PPP over ATM. IPoA works on individual PVC.

However, there are limitations on auto-detection of encapsulations:

1.LLC/VC-Mux automatically detection is only applicable to PVC#1 ~ PVC#4 of each ADSL port. PVC#5 ~ PVC#8 must be assigned the ATM AAL5 encapsulation method manually.

2.PPPoA works only for PVC#1 ~ PVC#4.

Refer to section 5.11 for IPoA configuration commands.

5.7.34quiet-period

Description 802.1x Quiet Period in Seconds (The period that 802.1x system stay in the quiet state)

Syntax quiet-period <number>

Parameter

Name Description

<number> Timeout for quiet period.

- 298 -