4. WEB Management

Web Configuration Tool Overview

To access Web Configuration Tool on an IDL-2402:

1.Connect a PC to the console port of the DSLAM. At the console, type the following CLI command:

WDS:>enable

/*enter the enable command mode from initial mode*/

WDS:%show management all /*display all in-band management IP setting*/ The default LAN IP address is got via DHCP.

2.At your web browser, enter the URL you retrieve by using the above command. If you need to change the accessing port number (default is 80) of the Web Configuration Tool, use the following CLI command (with the correct values added):

WDS:%configure

/*enter the configuration command mode from enable

mode*/

 

 

WDS:(conf)#http port <number>

/*set http port number*/

3.Logging in to Web Configuration Tool:

Once you connect to the DSLAM, a login page is displayed. You must enter your username and password to access the pages. The default login username and password are as follows:

User Name: admin

Password: admin

Click on the Sign in button.

You are now ready to configure your DSLAM using the Web Configuration Tool.

Figure 4-1 Web Configuration Tool login page

- 58 -