5. CLI Command Reference

Introduction

Access to the Operations System (OS) /Network Element (NE) system is protected by a logon security system. You can log on to the NE with the user name and password. After three failed logon attempts, the system refuses further attempts.

After you log on, the system monitors the interface for periods of inactivity. If the interface is inactive for too long, you are automatically logged off.

All the NEs have the same initial user name (admin) and password (admin). You should change the password as soon as possible, because the initial password is known to anyone who reads this manual. You can also change the user name or add additional user names. Use the “account add” command to enter a new user identification, password and authorization level. The system can handle one local logon session and at least four remote/OS sessions.

Connect Interface

InterfaceParameter

Console

Baud rate: 9600, Data bit:8, Parity: None, Stop bit :1

Telnet

Port 23

SSH

Port 22 (In Windows, you can run terminal emulator such as PuTTY)

Authorization Level

Level

Description

Super user

Superuser can run all commands.

Engineer

Engineer can run all commands except the commands for

 

creating/modifying/ deleting account and displaying running

 

configuration.

Guest

Guest can run most commands except the commands that have

(default)

creating/ modifying/deleting purpose.

- 206 -