Planet Technology IDL-2402 5.10 ADSL Configure Mode Commands, Name, Type, Syntax, Syntax, Syntax, Syntax, Parameter, Description, Description, Description, Description, Description

5.10 ADSL Configure Mode Commands

The commands in this section can be executed only in the ADSL Config mode.

5.10.1line mode carrier

Description Set/Clear xDSL line carrier Syntax line mode carrier {on off oninit}

Parameter None

5.10.2line mode diagnostic

Description Set/Clear xDSL line diagnostics Syntax line mode diagnostic {init off}

Parameter None

5.10.3line mode force-l3

Description Set force to power management L3 mode or not Syntax line mode force-l3 {on off}

Parameter None

5.10.4line mode mask

Description Set/Clear xDSL line Operational mode mask Syntax line mode mask {set clear } <opmode ID>

Parameter

Name	Description
<opmode id>	The ID of allowed ADSL modes of operation.
	Valid values: Use ‘list opmode’ command to
	see all the operation modes. Or refer to Table
	A-1.
	Default value: -
	Type: Mandatory

- 310 -