5.3.117 show vlan ethertype

Description Show VLAN S-Tag Ether type

Syntax show vlan ethertype

Parameter None

5.3.118 show vlan protocol-base

Description Display protocol based VLAN table

Syntax show vlan ethertype

Parameter None

5.3.119 show vlan-translation one-to-one

Description Display one-to-one VLAN translation table

Syntax show vlan-translation one-to-one

Parameter None

5.3.120 show vlan-translation many-to-one

Description Display many-to-one VLAN translation table

Syntax show vlan-translation many-to-one

Parameter None

5.3.121 telnet

Description Telnet to a destination (if you’re connecting to the DSLAM through its console port, this command is not provided)

Syntax telnet <target address>

Parameter

Name Description

target address IPV4 address or hostname

Valid values: xxx.xxx.xxx.xxx (xxx:0~255)

Default value: -

Type: Mandatory

5.3.122 traceroute

Description Trace route (and not use ICMP ECHO instead of UDP datagrams) Syntax traceroute <target address> [no_icmp]

Parameter

Name Description

target address IPV4 address

Valid values: xxx.xxx.xxx.xxx (xxx:0~255)

Default value: -

Type: Mandatory

- 245 -