5.19 Spectrum Profile Configure Mode Commands
The commands in this section can be executed only in the Spectrum Profile execution mode.
5.19.1aggregate
Description Set downstream/upstream aggregate power level Syntax aggregate {ds us} max powerlevel <number>
Parameter
Name | Description |
|
|
<number> | Power level (tenth dBm). |
| Valid values: 0~25.5 step 0.1 |
| Default value: - |
| Type: Mandatory |
|
|
5.19.2 bands <index> {start stop} Description Set RF bands
Syntax bands <index> {start stop} <value>
Parameter
Name | Description |
|
|
index | Bands array index. |
| Valid values: |
| Default value: - |
| Type: Mandatory |
|
|
value | Set start / stop frequency (kHz). |
| Valid values: |
| Default value: - |
| Type: Mandatory |
|
|
5.19.3bands <index> mask Description Set bands mask
Syntax bands <index> mask <value>
- 355 -