Planet Technology IDL-2402 manual 79

	System Protocol Setup - Main Setting
Label		Description

System Authentication section

Click on the drop-down list to enable or disable the 802.1x authentication function of the system. If you select “Disabled”, any setting in the Port Authentication section will not take effect.

Port Authentication section – Main Setting

		Select the line bridge port range to be listed.
Select Port		Remember to select the checkbox when you want to modify/delete the
		setting of a bridge port or set a bridge port to its default value.
		OFF/ON: disable/enable 802.1x authentication function for the bridge
Enable		port. When 802.1x is disabled, the system allows bidirectional normal
		traffic in this port in spite of its authentication state. Default is OFF.
		OFF: notify RADIUS server to stop accounting for this port.
Accounting Control		ON: notify RADIUS server to start accounting for this port.
		Default is OFF.
Accounting Interval		Type in the interval (300 ~ 600 sec) between accounting information
		updates. Default is 300 sec.
		Force-unAuth: cause the port to stay in the unauthorized state, ignoring
		all attempts by the client to authenticate.
Port Control		Force-Auth: disable 802.1X authentication and cause the port to
		transition to the authorized state without any authentication exchange
		required.
		Auto: enable 802.1x authentication and cause the port to begin the
		authentication process from unauthorized state.
Max	Request	Type in the number of times our system will send authentication requests
		to Supplicant if no response from the Supplicant is received. Default value
Authenication
		is 2.
		OFF: disable re-authentication after a period of time
ReAuthentication Control		ON: enable re-authentication after a period of time
		Default is OFF.
Max Request		Type in the number of times our system will send authentication
ReAuthentication		requests to the authentication server (RADIUS) if no response from the
		server is received. Default value is 2.

- 79 -