
5.14 Priority List Mode Commands
The commands in this section can be executed only in the Priority List execution mode.
5.14.1ds
Description Set Differentiated Service of packets to remark VLAN priority / Show Differentiated Service priority list entry / Disable Differentiated Service priority list entry
Syntax ds <number> prio <prio ID> {xdsl <port>/<pvc> gigabit <port>} dscp <dscp>
ds <number> list
ds <number> disable
Parameter
Name | Description | |
|
| |
<number> | Differentiated Service priority list number. | |
| Valid values: 1~256 | |
| Default value: - | |
| Type: Mandatory | |
|
| |
<prio ID> | Priority value | |
| Valid values: 0~7 | |
| Default value: - | |
| Type: Mandatory | |
|
| |
<port> | Port number. | |
| Valid values: 1~24(48) for xDSL, 1 for GBE | |
| Default value: - | |
| Type: Mandatory | |
|
| |
<pvc> | PVC number | |
| Valid values: 1 ~ 8 | |
| Default value: - | |
| Type: Mandatory | |
|
| |
<dscp> | Diffserv Code Points, which is a | |
| The standardized combinations are listed below: | |
| default | Default value (bits:000000) |
| af11 | Assured Forwarding Class 1:Low Drop |
|
| (bits:001010) |
|
|
|
- 334 -